Alloy 6082 marine aluminum profile

Alloy 6082 aluminum

In plate form, aluminum 6082 is the alloy most commonly used for general machining. It is widely used in Europe and has replaced 6061 alloy in many applications, primarily due to its higher strength (from a large amount of manganese) and its excellent resistance to corrosion. It is typically seen in transport, scaffolding, bridges and general engineering. "Alloy 6082’s good weldability, brazeability, corrosion resistance, formability and machinability make it useful for rod, bar and machining stock, seamless aluminum tubing, structural profiles and custom profiles." Haomei Aluminum has total annual production capacity of 200,000 metric ton aluminum sheet, strip and foil. It is equipped with 1+4 hot tandem rolling line, 4 cold mill production lines, and 5 foil mill production lines, and a complete complex of fishing equipment.

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 series. In the T6 and T651 temper, alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.

Alloy 6082 is typically used in:

small utility boats
yacht construction
pressure vessels
fan blades
heat exchangers
paper and textile rods
Chemical Industry
general structural applications
tankage
marine equipment
chemical equipment

6082 Marine Grade Aluminum Extrusion in Stock

Section	Alloy	Length
40 mm x 5 mm Flat	6082T6	5850 mm
40 mm x 6 mm Flat	6082T6	5850 mm
50 mm x 6 mm Flat	6082T6	5850 mm
80 mm x 6 mm Flat	6082T6	5850 mm
50 mm x 50 mm x 6 mm Angle	6082T6	5850 mm
38.1 mm x 38.1 mm x 4.76 mm Tee	6082T6	5850 mm
40 mm x 40 mm x 4 mm Tee	6082T6	5850 mm
50 mm x 50 mm x 4 mm Tee	6082T6	5850 mm
50.8 mm x 50.8 mm x 6.3 mm Tee	6082T6	5850 mm
38.1 mm O/D x 4.76 mm Tube	6082T6	5850 mm
114.3 mm O/D x 6.3 mm Tube	6082T6	5850 mm
50.8 mm O/D x 4 mm Tube	6082T6	5850 mm
50 mm Bulb Bar	6082T6	5850 mm
76 mm Bulb Bar	6082T6	5850 mm
50 mm Rider Bar	6082T5	5850 mm
80 mm Rider Bar	6082T5	5850 mm
1" O/D x 10 g Tube	6082T6	5850 mm
11/4" O/D x 10 g Tube	6082T6	5850 mm
200 mm x 80 mm x 8 mm x 12 mm Channel	6082T6	7000 mm
203 mm x 76 mm x 7 mm x 10 mm I Beam	6082T6	7000 mm
61/2" O/D x 1/4" Tube	6082T6	5000 mm
3" O/D x 1/4" Tube	6082T6	5000 mm

80 mm x 8 mm Flat	Flat
100 mm x 8 mm Flat	Flat
98.7 mm x 19 mm Bulb Flat	Flat

Haomei Marine Grade Metals